Parameterization - WAGO -SPEEDWAY 767 Manual

186 Parameterization via WAGOframe
Pos : 55.27 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/Par ametrierung allgemei n @ 8\mod_1279111047332_21.doc x @ 59948 @ 23 @ 1
15.7

Parameterization

All parameters listed here can be set using WAGOframe (or another FDT/DTM
border application) for the fieldbus coupler. If you use a fieldbus for the
parameterization, only certain parameters are configurable, depending on fieldbus
type.
The following sections contain information on the parameters and their
descriptions.
To open the parameterization user interface (DTM) of a 767 component, double-
click on the appropriate 767 component in the "Network View". The
parameterization user interface can also be opened by right-clicking on Offline
Parameter or Online Parameter in the context menu.
If several parameterization user interfaces are open, select one via the
corresponding tabs. If you switch a 767 component from the online mode to the
offline mode or vice versa, close the parameterization user interface and reopen it.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0