Figure 76: Example Of An Opened Dtm With The Available Parameters; Table. 91: Dtm Buttons - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Depending on the selection of parameterization user interfaces, various buttons
are at your disposal:

Table. 91: DTM buttons

Button
[Read]
(Online mode only)
[Write]
(Online mode only)
[Close]
(Online and offline mode)
[Apply]
(Offline mode only)
[Help]
(Online and offline mode)

Figure 76: Example of an opened DTM with the available parameters

Manual
Version 2.2.0
Parameterization via WAGOframe
Description
Reads and displays the parameters found in the 767
components.
Writes the modified values to the 767 components.
Closes the parameterization user interface (DTM).
Applies the entries in the project. Please note that the project
should also be subsequently saved (File > Save).
Opens the online help for an entry that has been previously
selected in the DTM (e.g., digital inputs, global setting).
Shows/hides parameter overview.
Displays the product data sheet. A PDF reader must be
installed on your PC.
Opens the DTM online help.
187