60
Commissioning
Figure 13: WAGO-I/O-CHECK User Interface (Example)
7.1.1
Control Mode
In "Control Mode," the process output data of the individual channels can be set
via write rules (assuming the fieldbus or a PFC application is not active).
1.
Click the I/O module. The representation of the I/O module is marked.
Figure 14: Selecting I/O Module
2.
Click the [Control-Mode] menu item.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-564 4AO U/I