Dio Module With 8 Channels (767-5801, 767-5802, 767-5803, 0767-5801/0000-0800, 0767-5802/0000-0800, 0767-5803/0000-0800); Operating Mode Do: Operation As A Digital Output Module; Operating Mode Di: Operation As Digital Input Module; Table 48: Parameters For Operation As A Digital Output Module - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
9.2.8 DIO Module with 8 Channels
(767-5801, 767-5802, 767-5803, 0767-5801/0000-0800,
0767-5802/0000-0800, 0767-5803/0000-0800)
Delay in Establishing the Connection
After the function mode of one or more 580x modules has been changed, it can
take several seconds to establish a connection when first establishing
communication with a fieldbus controller. The cause is that the function mode of
the I/O modules is changed and then saved.
The delay only occurs when first establishing the connection.
The following settings can be applied to the DIO Module with 8 Channels (preset
values in italics):
9.2.8.1

Operating mode DO: Operation as a Digital Output module

Table 48: Parameters for operation as a digital output module

Parameter
Diagnostics: Short circuit field supply
Diagnostics
Substitute strategy
Substitute value
9.2.8.2

Operating mode DI: Operation as Digital Input module

Table 49: Parameters for operation as a digital input module

Parameter
Diagnostics: Short circuit field supply
Diagnostics
Substitute strategy
Substitute value
Filter time [ms]
Manual
Version 2.2.0
Description
disabled
enabled
disabled
enabled
Set substitute value
Keep last value
0
1
Description
disabled
enabled
disabled
enabled
Set substitute value
Keep last value
0
1
deactivated
0.1
0.5
3.0
15.0
20.0
Parameterizing 103