Figure 44: Selecting An I/O Module (Example); Figure 45: Two Added I/O Modules - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC

Figure 44: Selecting an I/O module (example)

5. Repeat steps one through four until the module arrangement is concordant
with your fieldbus node. In our example, two I/O modules were added.

Figure 45: Two added I/O modules

To avoid having to apply the physical process image of the 767 components
created in WAGOframe in the "Network View" again, you can save the topology
as a project file. Click [File] > [Save].
Manual
Version 2.2.0
Parameterization via WAGOframe 157