Table 81: Group Number 7: General Software Errors; Table 82: Group Number 8: General Software Warnings; Table 83: Group Number 9: Specific Hardware Errors; Table 84: Group Number 11: Fieldbus-Specific Software Error - WAGO -SPEEDWAY 767 Manual

142 Diagnostics
Pos : 52.23 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Gruppennummer 07, 08 - Allgemeine Softwar e-Fehl er 767-1201 @ 10\mod_1308722680019_21.doc x @ 73958 @ @ 1

Table 81: Group Number 7: General Software Errors

Error code Error argument Cause
The blink codes for the general software errors assist the WAGO support team in further error
investigation. Please be ready to give them the group number, error code and error argument.

Table 82: Group Number 8: General Software Warnings

Error code Error argument Cause
The blink codes for the general software warnings assist the WAGO support team in further error
investigation. Please be ready to give them the group number, error code and error argument.
Pos : 52.24 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Gruppennummer 09 - Spezifisc he, betri ebsi nterne H ardware-F ehler (all e F BK auß er 767-1311) @ 10\mod_1308722160535_21.doc x @ 73954 @ @ 1

Table 83: Group Number 9: Specific Hardware Errors

Error code Error argument Cause
The blink codes for the general software warnings assist the WAGO support team in further error
investigation. Please be ready to give them the group number, error code and error argument.
Pos : 52.25 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Gruppennummer 11 - Fel dbuss pezifisc he Softwar efehl er 767-1201 @ 12\mod_1333461525864_21.doc x @ 92920 @ @ 1

Table 84: Group Number 11: Fieldbus-specific Software Error

Error code Error argument Cause
1
2
3
4
Pos : 52.26 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
1 Error during ETHERNET
driver initialization
2 Error during TCP/IP batch
initialization
3
Duplicate IP address
1 Error during FTP
initialization
2 Error during SNTP
initialization
3 Error during ETHERNET
initialization
4 Error during Webserver
initialization
5 Error during service
protocol initialization
6 Error during SNMP
initialization
1
Error during SNTP
configuration
ARG Operating system error
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Correction
Correction
Correction
Correction
Perform a restart of the fieldbus
coupler.
Check the configuration of the IP
address.
Contact WAGO support.
Check the configuration of the
SNTP parameters.
Contact WAGO support.
Manual
Version 2.2.0