Pos : 25.22 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Sens oren 767- 1xxx, -2xxx, - 38xx_8xM 8 @ 5\mod_1249292506750_21.doc x @ 39918 @ 2 @ 1

6.6

Connecting the Sensor Cables

The sensor cables provide power to the connected sensors and transmit the sensor

signals.

When using cables that have not been pre-assembled, make sure that these cables

are equipped with M8 plugs rated to IP 67. The following table outlines the

assignment of the sensor connections:

Table 24: Connection assignment of digital inputs

Connection

X1, X3, X5, X7 X2, X4, X6, X8

Pos : 25.23 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar bei t der Vers .kontakte( Sens oren) und Sens orstromaufnahme 400 mA @ 8\mod_1278305007084_21.doc x @ 58890 @ @ 1

The highest current carrying capacity of the supply contacts is 4 A!

Ensure that the sensors are supplied with power from the U

sensors´ power consumption is to be taken into consideration when determining

the present power demand for the U

The total maximum power consumption of the sensors must not exceed

400 mA!

Please note that the combined power consumption of all connected sensors is not

to exceed 400 mA. The distribution of power among the existing connections is

depending on the individual power requirements of the sensors.

Pos : 25.24 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

Connection diagram

supply line.