Table 74: Operational Messages Of The Fieldbus Coupler - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC

Table 74: Operational messages of the fieldbus coupler

Pos. LED
15 SBM
16 F
17 I/O
18 U
A
19 U
LS
Pos : 52.10 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
Color Cause
Green flashing S-BUS is being started.
Green S-BUS is functioning
without problems.
Red Disruption on the S-BUS.
Red Group error. At least one
diagnostic message is
available on the digital
inputs.
Yellow Input signal pending
Green Actuator supply is present.
OFF Actuator supply is not
present.
Green Logic supply and sensor
supply are present.
OFF Logic supply and sensor
supply are not present.
Diagnostics
Correction
-
-
Check whether all
components are connected to
the S-BUS. Also check the S-
BUS connection and S-BUS
cable
Check the power supply of the
connected sensors.
-
-
Connect the power supply and
check the voltage level, if
applicable.
-
Connect the power supply and
check the voltage level, if
applicable.
133