Service Communication Via Usb; 15.6.7.2.1 Adding The Communication Dtm Usb; Figure 59: Select Com Port - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
IP address and Device Name
The device has an IP address AND a device name.
Pos : 55.22 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/Systemupdate allgemein_3 @ 11\mod_1327414440069_21.doc x @ 86963 @ 45555 @ 1
15.6.7.2

Service Communication via USB

This section describes how to access your SPEEDWAY node via the WAGO
USB communication cable (756-4101/0042-0030).

15.6.7.2.1 Adding the Communication DTM USB

So that you can parameterize the fieldbus coupler and the I/O modules connected
with it via the USB connection, establish a connection between your PC and the
767 node via the WAGO communication cable.
1. Select the respective COM port (I/O Service Port COM (xx)) in the
interface settings.
Access to the port
Make sure that the selected port is not blocked by other applications.

Figure 59: Select COM port

2. Right-click on "Network" in the "Network View" window.
In the context menu, select Add. The "Add..." dialog opens.
3.
Manual
Version 2.2.0
Parameterization via WAGOframe 171