Figure 67: System Update 2 (Example) - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC

Figure 67: System update 2 (example)

2. The fieldbus coupler and all connected I/O modules are listed in the right
window. All 767 components that can be updated are pre-selected. If the
pre-selection is incorrect or if specific 767 components should not be
updated, deselect them ("Update?" column).
"Actual: Version":
"Target: Version":
Pos : 55.23 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/Systemupdate allgemein_4 @ 11\mod_1327414910569_21.doc x @ 86971 @ @ 1
Click [Start!] to update the system. The 767 components are marked in
3.
yellow while being updated.
Firmware actualization
During the firmware updating process, the fieldbus coupler disconnects each of its
COM ports. A PC equipped with Windows 2000 will detect this, and a Windows
message appears. This is not an error message. Confirm the message by pressing
[OK].
Manual
Version 2.2.0
Parameterization via WAGOframe
Firmware currently present on the device
Version of the firmware that should be loaded
into the 767 components. If multiple "Target"
versions can be selected, select the one relevant
to you.
177