Figure 21: Digital Inputs - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Pos : 25.25 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/F eldbus koppler/Ansc hluss _Sens oren @ 7\mod_1268915562502_21.doc x @ 53549 @ @ 1
To connect the sensors to the digital inputs X1 ... X8, proceed as follows:
1. Disconnect the power supply from those devices/machines on which you
have mounted the fieldbus coupler.
2. Insert the sensor cable plug into a digital input socket (4) of the fieldbus
coupler, and tighten it via knurled nut.
3. Screw a protective cap on all unused input sockets to ensure that IP67
degree of protection is provided.
Pos : 25.26 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/F eldbus koppler/Ansc hluss _Sens oren - Bild @ 7\mod_1268906365883_21.doc x @ 53434 @ @ 1
4

Figure 21: Digital inputs

Pos : 25.27 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
Connecting Data and Supply Cables
4
61