Configuring Via The Web-Based Management System (Wbm); Wbm User Groups; Table 41: Wbm User Groups - WAGO 750-363/0040-0000 Manual

112 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9 Configuring via the Web-Based Management
System (WBM)
An integrated Web server can be used for configuration and administration of the
device. The HTML pages together, they are referred to as the Web-based
Management System (WBM).
The WBM pages saved internally provide current information about the
configuration and status of the device.
The configuration of the device can be changed via the special configuration
pages. Authentication is required for this.
Also HTML pages created by yourself can be save via the implemented file
system.
After changes to the configuration, a restart may be necessary!
In order for changed configuration settings to take effect, it may be necessary for
you to perform a system restart after your changes. This is then indicated in the
description text on the respective WBM pages.
9.1

WBM User Groups

For authentication, 3 different password-protected user authorization groups are
provided as standard:

Table 41: WBM User Groups

User Group
admin
user
guest
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Default Password
wago
user
guest
Access Rights
Read/write access to all WBM pages as
well as passwords modification and
CODESYS application download, if this
is enabled for CODESYS (WBM page
"Administration"> "Security Settings">
"Enable CODESYS port authentication")
Read/write access to all WBM pages,
but no write authorization on WBM-page
"Administration"
Read only