Table 100: Parameter For The Snmp Configuration; Table 101: Parameters For The Snmp V3 Configuration - WAGO -SPEEDWAY 767 Manual

192 Parameterization via WAGOframe
Pos : 55.36 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/SNMP- Konfigur ation @ 12\mod_1336126850586_21.doc x @ 94509 @ @ 1
SNMP Configuration

Table 100: Parameter for the SNMP Configuration

Parameters
Activate SNMP
Device description
Email contact address
Device location
Activate SNMP V1/V2c
Community name used
1st trap receiver
1st trap community name used
1st trap version
2nd trap receiver
2nd trap community name used
2nd trap version
Pos : 55.37 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/SNMP V3-Konfiguration @ 12\mod_1336130876267_21.doc x @ 94513 @ @ 1
SNMP V3 Configuration

Table 101: Parameters for the SNMP V3 Configuration

Parameters
Activate user 1 / user 2
Authentication type
Authentication name
Authentication key
Enable encryption
Encryption password
Activate notification/trap
Notification recipient
Pos : 55.38 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
767-1201 FC PROFINET IO 8DI 24V DC
Description
Choose if you want to enable or disable SNMP.
The device name of the fieldbus coupler is displayed.
The email contact address is displayed.
The location of the device is displayed.
Choose if you want to enable or disable SNMP V1/V2c.
The community name used is displayed.
The IP address for the 1st trap receiver is displayed.
The 1st name of the network community used is
displayed.
Choose if you want to enable trap version 1 or 2.
The IP address for the 2nd trap receiver is displayed.
The 2nd name of the network community used is
displayed.
Choose if you want to enable trap version 1 or 2.
Description
Choose if you want to enable or disable user 1.
Select the authentication type.
- None
- MD5
- SHA1
Enter the authentication name if you have selected MD5
or SHA1 as the authentication type.
Enter the password with at least 8 characters if you have
selected MD5 or SHA1 as the authentication type.
Choose if you want to enable or disable DES encryption.
Enter the password with at least 8 characters if you have
selected DES encryption.
Choose if you want to enable or disable notification/trap.
The IP address of the notification recipient is displayed.
WAGO-SPEEDWAY 767
Manual
Version 2.2.0