Fastening The Fieldbus Coupler With Profile Adapter To A Profile Rail - WAGO -SPEEDWAY 767 Manual

46 Mounting
Pos : 23.22 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/F eldbus koppler/M ontage mit Pr ofiladapter an ei ner Pr ofilsc hiene 767-xxxx_Fel dbus koppl er @ 7\mod_1268894150094_21.doc x @ 53366 @ 3 @ 1
5.5.2 Fastening the Fieldbus Coupler with Profile Adapter to a
Profile Rail
To fasten the fieldbus coupler to a profile rail of your system, two nuts are
required with one screw each (length of screw threads must be compatible with
your system).
1. Disconnect the power supply from those devices on which you wish to
mount the fieldbus coupler.
2. Insert the two screws into the holes above and beneath the fastened fieldbus
coupler on the profile adapter.
3. Fasten an appropriate nut on each of these screws.
4. Insert the profile adapter with the attached fieldbus coupler into the profile
rail of your system. Position it and tighten the screws.
Pos : 23.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0