Pos : 23.27 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/F eldbus koppler/M ontage_Di stanzs tüc k T eil 1_767- xxxx_F eldbus koppler @ 7\mod_1268894153031_21.doc x @ 53394 @ 2 @ 1

5.7

Mounting the Spacer in the Case of Compact

Arrangement

By using the spacer, a sufficient mounting distance can be achieved when directly

mounting the 767 Series components, and gaps can be eliminated where otherwise

dirt and other substances could accumulate. In addition, it is possible to optimize

the cable routing of the sensors and actuators. For this purpose, two fastening lugs

each are included on the spacer for cable ties.

Disconnect the power supply from those devices on which you wish to

mount the fieldbus coupler.

The spacer can only be inserted into the appropriate openings of the fieldbus

coupler from the bottom. To bind both components, place the fieldbus

coupler on the spacer or push the spacer from the bottom into the coupler.

Fasten the components on a flat surface by fastening the fieldbus coupler to

the grounded frame of your system or to another grounding point with three

M4 screws via the mounting holes.

Pos : 23.28 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/F eldbus koppler/M ontage_Di stanzs tüc k T eil 1_767- xxxx_F eldbus koppler - Bild @ 7\mod_1268894153437_21.doc x @ 53398 @ @ 1