Pos : 52.29 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Auslesen des Bli nkc odes ohne WBM @ 8\mod_1279543873995_21.doc x @ 60478 @ 2 @ 1

14.5

Readout of Blink Codes using WAGO DTMs

Error messages or warnings from the fieldbus coupler are also displayed in

WAGOframe under the "Blink code" entry. For this to function, the WAGOframe

software (or another FDT border application) and the WAGO DTMs must be

installed on your PC. For more information, see section "Parameterization via

FDT/DTM". An overview of the meaning of the blink codes can be found in

section "Meaning of the Blink Codes and Procedures for Correcting Them".

Figure 30: Example of the blink code display under the "Blink code" parameter in WAGOframe

Pos : 52.30 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Hinweis/Hi nweis : Stör meldungen auc h i m WBM @ 8\mod_1279532605266_21.doc x @ 60412 @ @ 1

Web-based management

Error messages or warnings from the fieldbus coupler are also displayed in the

web-based management on the "Information" page.

Pos : 53 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

Manual

Version 2.2.0

Diagnostics

145

Table of Contents