168
Parameterization via WAGOframe
15.6.6
Life List
The life list is used to search for all devices connected to the S-BUS in order to
select them for configuration directly.
You have the option to use the "WAGO Service Speedway" DTM to search for
the connected fieldbus coupler or to use the device driver for the fieldbus coupler
to search for I/O modules connected to it.
To search for fieldbus couplers or I/O modules, proceed as follows:
1.
Right-click on the respective device driver in the "Network View" pane. In
this example, the device driver for the fieldbus coupler is selected to search
for the I/O modules connected to it.
2.
In the context menu, select Scan > Life List. The life list opens.
Figure 57: Searching for connected I/O modules using the life list (example)
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0