File System; Figure 54: File System (Example); Table 89: File System - WAGO -SPEEDWAY 767 Manual

166 Parameterization via WAGOframe
15.6.4

File System

Use the file system function to administer the file system on the fieldbus coupler.
You can format drives, extract data from the firmware, create or delete directories,
upload, download and delete files.

Figure 54: File system (example)

Table 89: File system

Parameter/button
Drives
[Reread]
[Format]
[Extract]
[Download to device]
[Upload from device]
[Create directory]
[Delete]
State
Pos : 55.14 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
767-1201 FC PROFINET IO 8DI 24V DC
Description
Select the fieldbus coupler drive:
U:\ (WBM pages) – not available for 767-2501
P:\ (CODESYS-Program) – only for 767-2301 and 767-2501
Reread the drive currently selected.
Format the drive selected under "Drives".
All files are deleted.
Extract files from the firmware (WBM, system settings, etc.).
Note: Any changes made to the existing files may be overwritten
when files are extracted again!
Copy files from the file system of the PC to the fieldbus coupler.
Without selection: Data is saved to the top level of the file system.
Selected folder: Data is saved to the selected folder.
Copy files from the fieldbus coupler to the PC (e.g., to edit them).
Create a new director (folder)
Without selection: The new directory is created at the top level of
the file system.
Selected folder: The new directory is created in the selected folder
of the file system.
Delete selected files or directories (folders). You can only delete
empty directories (folders).
Status display of an operation:
Green: The selected procedure is completed.
Yellow: The selected procedure is active.
Red: Error in the action just executed.
WAGO-SPEEDWAY 767
Manual
Version 2.2.0