Ethernet Communication (Dtm Is Offline); Figure 71: Selecting The Communication Dtm Tcp; Figure 72: Dtm For The Interface Configuration - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC

Figure 71: Selecting the Communication DTM TCP

15.6.7.3.2 ETHERNET Communication (DTM is offline)

1 Double-click on the "WAGO TCP Speedway" communication DTM in the
"Network View" window. The DTM for the interface configuration opens.
Setting the Port
You can only set the port as long as no DTM has been added below the "WAGO
TCP Speedway"!

Figure 72: DTM for the Interface Configuration

2 In "Network View", right-click on "WAGO TCP Speedway" and select the
Add ... entry in the context menu. The "Add" dialog opens.
In the "Add" dialog, select the corresponding fieldbus coupler. Click [OK]
3
to confirm your selection. The fieldbus coupler appears in "Network View"
at the bottom right.
Manual
Version 2.2.0
Parameterization via WAGOframe 181