Figure 40: Wago-I/O-Check User Interface - WAGO 750-632 Manual

82 Commissioning
In order to open specific parameterization dialogs for the I/O module, proceed as
follows:
1. Right click on the I/O module.
2. Select the Settings menu item (see following figure

Figure 40: WAGO-I/O-CHECK User Interface

The parameterization dialog opens. This forms the basis for the subsequent
explanation.
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
WAGO I/O System 750/753
750-632 Proportional Valve Module