Online And Offline Parameter Setting; Offline Parameter Setting; Figure 46: Opening The Configuration Interface (Offline, Example) - WAGO -SPEEDWAY 767 Manual

158 Parameterization via WAGOframe
15.5

Online and Offline Parameter Setting

The options of online and offline parameter setting are available for configuring
the 767 components. The offline mode enables the parameterization of a 767
component that is not yet present. In the offline mode, first store the parameters in
a project and later transfer them to the 767 components. In the online mode, there
is a direct connection between the display and the connected 767 components. If a
767 component is in the online mode, its name is displayed in bold and italic font
in the network window.
15.5.1

Offline Parameter Setting

Requirement:
To configure the fieldbus coupler in offline mode, the network structure of the
767 node must have been transferred to WAGOframe (see section
"Parameterization via WAGOframe" > "Setting Up Network Manually").
For offline configuration, proceed as follows:
1. Right-click on the "<Speedway:> 0767-xxxx" device driver of the fieldbus
coupler in the "Network View" pane.
2. In the context menu, select Offline Parameter. The configuration interface
opens with the fieldbus coupler parameters. Details on these parameters can
be found in section "Parameterizing".

Figure 46: Opening the configuration interface (offline, example)

3. To configure the I/O modules, right-click on one of the I/O modules in the
"Network View".
4. In the context menu, select Offline Parameter. The configuration interface
opens with the corresponding I/O module parameters. Information on these
parameters can be found in the respective I/O module manual.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0