Operating Elements; Figure 4: Dip Switch. All Switches Are Set On "Off" At Delivery; Table 6: Default Settings Of Dip Switch - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Pos : 20.24 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Neue Ü bersc hriften/Ebene 2Bedienel emente - Übersc hrift 2 @ 4\mod_1239191655456_21.doc x @ 30439 @ 2 @ 1
4.4

Operating Elements

Pos : 20.25 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Bedi enel emente/F eldbus koppler/Di p-Sc halter 767- 1201, Einl eitung, Default-T abelle, Bil d und Legende @ 8\mod_1279277150324_21.doc x @ 60185 @ @ 1
The DIP switch is used to set the PROFINET station name for the fieldbus
coupler. The fieldbus coupler is accessible under this name in the PROFINET
network. Moreover, the DIP switch makes it possible to execute a hardware reset
of the fieldbus coupler and to start the bootstrap loader. A sealable, transparent
cover protects the DIP switch. The allocation of values is as follows:

Table 6: Default Settings of DIP Switch

Switch
Binary value for/
Functions
Switch setting

Figure 4: DIP switch. All switches are set on "Off" at delivery

Manual
Version 2.2.0
1 2 3 4 5
0 1 2 3 4
2 2 2 2 2
Off Off Off Off Off Off Off
Device Description
6 7 8 9
5 6
2 2 DN DNI
Off Off
27
10 11 12
- Boot/ Reset
Execute
Off Off Off