Software Interface; Figure 48: Wago-I/O-Check User Interface, Bus Node With I/O Module - WAGO 750-495/040-00 Series Manual

178 Commissioning
8.1.1

Software Interface

To display the node on the PC, connect both using the USB communication
cable and launch WAGO-I/O-CHECK.
The node is displayed.
Figure 48: WAGO-I/O-CHECK User Interface, Bus Node with I/O Module (Example)
Right-click on the picture of the I/O module and select the [Settings] menu item.
The "3-Phase Power Measurement Module" dialog opens.
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR