Replacing The Marker Card And Strip; Figure 13: Replacing The Marker Card And Strip - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Pos : 23.24 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/F eldbus koppler/M ontage_Besc hriftung austausc hen 767- xxxx_Fel dbus koppl er @ 7\mod_1268894151375_21.doc x @ 53378 @ 2 @ 1
5.6

Replacing the Marker Card and Strip

A blank module marker card (11) and channel marker strip (12) are attached when
delivered. For labeling them, proceed as follows:
1. Press the slot screwdriver (maximum slot width: 3mm) into the small
opening under the cover and lever it up.
2. Remove the protective cover.
3. Mark the marker card resp. marker strip with a waterproof pen.
4. Reinsert the protective cover and press it firmly in place.
New cards, strips and pens can be obtained from WAGO.
Pos : 23.25 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/F eldbus koppler/M ontage_Besc hriftung austausc hen 767- xxxx_Fel dbus koppl er - Bild @ 7\mod_1268894151750_21.doc x @ 53382 @ @ 1

Figure 13: Replacing the marker card and strip

Pos : 23.26 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
11
12
Mounting 47