WAGO-I/O-SYSTEM 750
750-451 8 AI RTD
Save your settings before you start the parameterization!
Before you start the parameterization, you should backup your current settings to
a parameter file. This way, in case the parameters are wrong, you can always fall
back on the original values.
In order to open specific parameterization dialogs for the I/O module, proceed as
follows:
1.Right click on the I/O module.
2.
Select the Settings menu item (see following figure
Figure 12: WAGO-I/O-CHECK User Interface
The configuration dialog appears, which forms the basis for the following
description. This forms the basis for the subsequent explanation.
Commissioning
67
Manual
Version 1.2.0