Pos : 29 /Serie 767 ( WAGO-SPEED WAY)/Konfiguri eren/F eldbus koppler/WBM 767-1201, -1301, -2301 allgemein_1 @ 8\mod_1279528759979_21.doc x @ 60359 @ 2 @ 1

7.3

The Web-Based Management (WBM)

The Web-Based Management (WBM) serves to configure the fieldbus coupler.

An Internet browser is needed in order to use the WBM. Enter the IP address of

the fieldbus coupler into the address bar (e.g., http://192.168.1.100).

Pos : 30 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: 767- 1201 Hinweis zum WBM @ 8\mod_1279528827228_21.doc x @ 60365 @ @ 1

IP Address

The device can only be accessed via an IP address if the station name is set (via

DIP switch, temporarily assigned by a controller or read from retentive memory)

AND

it has an IP address (temporarily assigned by the controller or retentive memory).

If both exist in the memory, then it is not necessary to establish a connection to a

controller.

Pos : 31 /Serie 767 ( WAGO-SPEED WAY)/Konfiguri eren/F eldbus koppler/WBM 767-1201 allgemei n_2 @ 12\mod_1335436009718_21.doc x @ 94290 @ @ 1

If you select the first time a link from the navigation bar, appears the password

prompt, because the WBM part is password-protected.

No password protection

The home ("Information" page) and the pages "ETHERNET" 'and "TCP / IP" are