Set Up Network Automatically; Figure 55: Setting Up The Network (Example); Figure 56: Components Connected To The 767 Node (Example) - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Pos : 55.15 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/N etz wer k aufbauen und Life List @ 8\mod_1279539846181_21.doc x @ 60446 @ 33 @ 1
15.6.5

Set up network automatically

This involves inserting all 767 components into the topology that are connected to
the USB connection.
1. Right-click on a coupler in the "Network View" pane or directly on the
"WAGO Service Speedway" DTM.
2. In the context menu, select Scan > Create Network.
If the "WAGO Service Speedway" DTM is selected, all components
connected to the 767 nodes will be carried over into the topology. If your
coupler is selected, only the I/O modules will be attached to the coupler.

Figure 55: Setting up the network (example)

Figure 56: Components connected to the 767 node (example)

Manual
Version 2.2.0
Parameterization via WAGOframe 167