WAGO -SPEEDWAY 767 Manual

WAGO -SPEEDWAY 767 Manual

8do 24v dc 0.5a if (8xm8) digital output module 24 v dc / 0.5 a for wago-speedway 767
Hide thumbs Also See for WAGO-SPEEDWAY 767:
Table of Contents

Advertisement

Quick Links

WAGO-SPEEDWAY 767
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
767-4801/000-800
8DO 24V DC 0.5A IF (8xM8)
Digital Output Module 24 V DC / 0.5 A
Version 1.1.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WAGO-SPEEDWAY 767 and is the answer not in the manual?

Questions and answers

Summary of Contents for WAGO WAGO-SPEEDWAY 767

  • Page 1 WAGO-SPEEDWAY 767 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Digital Output Module 24 V DC / 0.5 A...
  • Page 2 WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...
  • Page 3: Table Of Contents

    Information on Mounting ................ 28 Tools and Accessories Required for Mounting ........30 Direct Mounting on Your System ............31 Mounting on a Carrier Rail (only with WAGO Accessories) ....32 4.4.1 Fastening the Carrier Rail Adapter to the Module ......32 4.4.2...
  • Page 4 Table of Contents WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) 4.5.2 Fastening the Module with Profile Adapter to a Profile Rail ..... 35 Marking and Replacing the Marking Spaces .......... 36 Mounting the Spacer in the Case of Compact Arrangement ....37 Connecting Data and Supply Cables ............
  • Page 5: Notes About This Documentation

    Pos : 9 /Seri e 767 ( WAGO- SPEED WAY) /Wic htige Erl äuter ung en/Sic her hei tshi nweis e/Warnung/Warnung: R eleas e N otes beac hten @ 8\mod_1278912368761_21.doc x @ 59530 @ @ 1...
  • Page 6: Symbols

    Notes about this Documentation WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 13.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 13.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-SPEEDWAY 767 Notes about this Documentation 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 13.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...
  • Page 8: Number Notation

    Font Conventions Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save > A greater-than sign between two names means the selection of a menu item from a menu.
  • Page 9: Important Notes

    Thus, the existence of such rights cannot be excluded. Pos : 16.4 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Pers onalqualifi kation 767- xxxx @ 5\mod_1248175871265_21.doc x @ 38705 @ 3 @ 1 2.1.2...
  • Page 10: Use In Compliance With Underlying Provisions

    Pos : 16.8 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Bes timmungsgemäß e Verwendung 767-D Os 1_1 Hi nweis _R üc kwir kungsfr ei @ 11\mod_1317278760144_21.doc x @ 79992 @ @ 1 The digital outputs of the module are interference-free to eliminate any impact by the internal potential groups.
  • Page 11: Safety Advice (Precautions)

    Series component has been in operation, allow it to cool off before moving it. Pos : 16.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1...
  • Page 12: Safety Equipment

    Observe the marking on the front and rear side of the module. Pos : 16.21 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sic her hei tsei nrichtungen 767- xxxx @ 7\mod_1268142379773_21.doc x @ 52055 @ 2 @ 1 Safety Equipment All 767 Series products are designed to meet the requirements of IP67.
  • Page 13: Notes On Operation

    Important Notes 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 16.23 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 1 @ 7\mod_1266921815843_21.doc x @ 51219 @ 2 @ 1 Notes on Operation...
  • Page 14: Device Description

    Pos : 18.1 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Gerätebesc hreibung/Gerätebeschr eibung - Übersc hrift 1 @ 3\mod_1233756084656_21.doc x @ 27096 @ 1 @ 1 Device Description Pos : 18.2 /Serie 767 (WAGO-SPEED WAY)/Ger ätebesc hrei bung/I/O-Module/Gerätebes chr eibung 767- 48xx Standar d @ 5\mod_1248412361437_21.doc x @ 38974 @ @ 1 The digital output module 767-4801/000-800 is used to control solenoid valves, gates, transmitters, relays or other electrical loads.
  • Page 15: Connectors

    M8 socket solenoid valves or gates). Pos : 18.8 /Serie 767 (WAGO-SPEED WAY)/Ger ätebesc hrei bung/Ansc hl üss e/I/O-Module/Legende Anschl uss 767- xxxx Vers orgung, nic ht 4803 und 4804 @ 5\mod_1248847875765_21.doc x @ 39171 @ @ 1 Supply output...
  • Page 16: Marking Possibilities And Fastening

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 18.10 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Befestigung/I/O-Module/Besc hriftung und Befestigung 767-xxxx_8xM 8 - Bild @ 5\mod_1248845069421_21.doc x @ 39114 @ 2 @ 1 Bes chriftungsmöglichkeiten Marking Possibilities and Fastening Figure 2: Marking possibilities and fastening (exemplary) Pos : 18.11 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Befestigung/I/O-Module/Legende z u Beschriftung und Befes tigung 767- xxxx @ 5\mod_1249475777546_21.doc x @ 40514 @ @ 1...
  • Page 17: Display Elements

    Yellow/red Information on outputs Pos : 18.17 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Anz eigeel emente/I/O-M odul e/Legende zu Anz eigeel emente 767- xxxx, Pos. 18+19: Status U A und ULS @ 7\mod_1268053208570_21.doc x @ 51957 @ @ 1 Green Actuator supply is present.
  • Page 18: Labeling

    Pos : 18.19.2 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Bedruc kung 767-4801 - Bild @ 5\mod_1248860315750_21.doc x @ 39329 @ @ 1 Figure 4: Labeling (example) Pos : 18.19.3 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Legende zur Bedr uc kung 767- xxxx DO, AO @ 5\mod_1248860045484_21.doc x @ 39318 @ @ 1 Table 6: Legend for figure "Labeling"...
  • Page 19: Figure 5: Label On The Module

    Pos : 18.19.6 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Bedruc kung sei tlich - Bild @ 5\mod_1248864035578_21.doc x @ 39357 @ @ 1 Figure 5: Label on the module Pos : 18.20 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Bedruc kung sei tlich - Legende @ 9\mod_1286969974465_21.doc x @ 65601 @ @ 1 Table 7: Description of manufacturing number...
  • Page 20: Schematic Diagram

    Schematic Diagram Pos : 18.23 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Sc hematis che Sc haltbilder/I/O-M odule/Ei nleitung zum sc hematisc hen Sc haltbil d 767-4xxx D O @ 10\mod_1306758024488_21.doc x @ 73329 @ @ 1 The following schematic diagram provides an overview of the power supply and principle of operation of the power supply connections, as well as the digital outputs of the modules (see also chapters "Connecting the Supply Cable"...
  • Page 21: Dimensions

    Pos : 18.26 /Alle Serien (Allgemeine M odul e)/Übersc hriften für all e Seri en/Gerätebes chr eibung/Abmess ungen - Ü bersc hrift 2 @ 5\mod_1248869612468_21.doc x @ 39441 @ 2 @ 1 Dimensions Pos : 18.27 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Abmessungen/I/O-M odule/Abmessungen 767- xxxx_IO_8xM 8 - Bild @ 5\mod_1248872498546_21.doc x @ 39493 @ @ 1 Figure 7: Dimensions of the module in millimeters (exemplary) Pos : 18.28 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 22: Technical Data

    If the device is used in an application in the hazardous area, the technical data contained in the ATEX/IECEx certificate are binding in this application! Pos : 18.31 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Tec hnisc he Daten/I/O-M odule/Digitalausgangs module/Tec hnisc he D aten 767-4801 @ 5\mod_1248946002859_21.doc x @ 39524 @ 33333333333 @ 1 3.7.1 General Information Table 8: Technical Data –...
  • Page 23: Outputs

    WAGO-SPEEDWAY 767 Device Description 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) 3.7.4 Outputs Table 11: Technical data – Outputs Number of outputs Connection type M8 connectors, 3 poles Wire Connection 2- to 3-wire Output voltage ≤ U Output current (per channel) 0.5 A (max.
  • Page 24: Information On Selecting The Actuator

    Device Description WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) 3.7.5 Information on Selecting the Actuator Table 12: Technical data – Information on Selecting the Actuator Delay time HW from 0 to 1 (0 – 90 %) Typically 75 µs (resistive load) from 1 to 0 (0 - 90 %) Typically 270 µs (resistive load)
  • Page 25: Configurable Functions

    WAGO-SPEEDWAY 767 Device Description 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) 3.7.7 Configurable Functions Table 14: Technical data – Configurable Functions Inversion (per channel) On/off Substitute value strategy Switch substitute value/hold last value per channel) Substitute value (per channel) Manual mode (per channel)
  • Page 26: Approvals

    Pos : 18.33.3.3 /D okumentati on allgemein/Gli ederungsel emente/------Leerzeil e------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1 Pos : 18.33.4 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Zul ass ung en/Zul ass ung en I/O-Modul e 767- xxxx Ex, ohne Variantenangabe - Ei nlei tung @ 24\mod_1447686155055_21.doc x @ 195692 @ @ 1 The following Ex approvals are pending for 767-4801/000-800 module: Pos : 18.33.5 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Ex-Z ul ass ungen/TÜ...
  • Page 27: Standards And Guidelines

    Standards and Guidelines Pos : 18.35.2 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Nor men und Richtlini en/N or men und Richtlinien I/O-Modul e 767- xxxx, ohne Variantenangabe - Ei nleitung @ 24\mod_1447686649865_21.doc x @ 195700 @ @ 1 The module 767-4801/000-800 meets the following standards and guidelines: Pos : 18.35.3 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/EM V-Nor men - Standard/EG-EM V-Richtli nie 2004/108/EG @ 7\mod_1274262373820_21.doc x @ 56628 @ @ 1...
  • Page 28: Mounting

    Pos : 21.2 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Hi nweis e 767- xxxx allgemei n_1 @ 5\mod_1249028727125_21.doc x @ 39643 @ 2 @ 1 Information on Mounting The following information shall always be observed: •...
  • Page 29 Mounting 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 21.5 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/Hi nweis : Montage_Ei nbaulag e_767- xxxx_I/O-M odule @ 24\mod_1448268126523_21.doc x @ 196008 @ @ 1 Any mounting position is possible. Ensure a safe mounting position! In explosion hazardous environments no increased mechanical loads must be present at the installation location.
  • Page 30: Tools And Accessories Required For Mounting

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 21.7 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Wer kzeug 767- xxxx allgemein_1 @ 5\mod_1249034240265_21.doc x @ 39783 @ 2 @ 1 Tools and Accessories Required for Mounting Depending on the mounting type, the following tools are required for installation: •...
  • Page 31: Direct Mounting On Your System

    Pos : 21.11 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Hinweis/Hi nweis : 767- xxxx Distanz stüc k @ 8\mod_1279025151416_21.doc x @ 59810 @ @ 1 Direct Mounting We recommend using WAGO spacers for compact direct mounting.
  • Page 32: Mounting On A Carrier Rail (Only With Wago Accessories)

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 21.15 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage auf Tr agschi ene 767- xxxx allgemei n @ 5\mod_1249030348312_21.doc x @ 39746 @ 23 @ 1 Mounting on a Carrier Rail (only with WAGO Accessories) 4.4.1...
  • Page 33: Fastening The Module With Carrier Rail Adapter To A Carrier Rail

    (item no.: 249-116 or 249-117) for stabilization is required. Pos : 21.19 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Befestigung auf Tragsc hi enenadapter 767- xxxx - Bil d @ 5\mod_1249030807718_21.doc x @ 39757 @ @ 1 Figure 10: Mounting the carrier rail adapter (exemplary) Pos : 21.20 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 34: Mounting On A Profile Rail (Only With Wago Accessories)

    Pos : 21.22 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage an einer Pr ofilsc hiene 767- xxxx_8xM8 - Bil d @ 5\mod_1249032233640_21.doc x @ 39769 @ @ 1 Figure 11: Fastening to the profile adapter Pos : 21.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 35: Fastening The Module With Profile Adapter To A Profile Rail

    Mounting 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 21.24 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage mi t Pr ofiladapter an einer Pr ofilsc hiene 767- xxxx allgemein @ 5\mod_1249032474562_21.doc x @ 39773 @ 3 @ 1 4.5.2...
  • Page 36: Marking And Replacing The Marking Spaces

    New module marker cards can be obtained through WAGO. Pos : 21.27 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Besc hriftung austauschen 767- xxxx_8xM8 - Bil d @ 5\mod_1249280838031_21.doc x @ 39793 @ @ 1 Figure 12: Replacing the marking spaces Pos : 21.28 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 37: Mounting The Spacer In The Case Of Compact Arrangement

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 21.29 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 1_767- xxxx allgemei n @ 5\mod_1249281269203_21.doc x @ 39797 @ 2 @ 1 Mounting the Spacer in the Case of Compact...
  • Page 38: Figure 14: Attaching Another Module With A Spacer

    The last 767 component is fastened without a spacer. Pos : 21.33 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 2_767- xxxx_8xM 8 - Bild @ 5\mod_1249281783109_21.doc x @ 39809 @ @ 1 Figure 14: Attaching another module with a spacer Pos : 22 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 39: Connecting Data And Supply Cables

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 23.1 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/01_Ansc hl uss der Daten- und Vers orgungs kabel - Übersc hrift 1 @ 8\mod_1278310189976_21.doc x @ 58919 @ 1 @ 1 Connecting Data and Supply Cables Pos : 23.2 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/02_Hinweis e - Ü...
  • Page 40: Required Accessories

    Pos : 23.9 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/Ans chl uss _Hinweise T eil 3.1 @ 8\mod_1278314911479_21.doc x @ 58959 @ @ 1 •...
  • Page 41: Connecting The S-Bus Cables

    Connecting Data and Supply Cables 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 23.12 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_S-BU S allgemein @ 5\mod_1249287447062_21.doc x @ 39873 @ 2 @ 1 Connecting the S-BUS Cables The S-BUS is used for communication between a fieldbus coupler and the connected 767 Series components.
  • Page 42: Figure 15: S-Bus Connected To A Fieldbus Coupler And Modules

    Pos : 23.13 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_S-BU S_8xM 8 - Bild @ 5\mod_1249291591812_21.doc x @ 39902 @ @ 1 Figure 15: S-BUS connected to a fieldbus coupler and modules Pos : 23.14 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 43: Connecting The Supply Cable

    0 V U Pos : 23.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1 The highest current carrying capacity of the supply contacts is 4 A!
  • Page 44: Figure 16: Supply Cable Connected To A Fieldbus Coupler And Modules

    Pos : 23.19 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Spannungs vers orgung _8xM 8 - Bild @ 5\mod_1249292056906_21.doc x @ 39910 @ @ 1 Figure 16: Supply cable connected to a fieldbus coupler and modules Pos : 23.20 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 45: Connecting The Actuator Cable

    X1, X3, X5, X7 X2, X4, X6, X8 Pos : 23.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers.kontakte(Aktor en) @ 8\mod_1278305558285_21.doc x @ 58898 @ @ 1 The highest current carrying capacity of the supply contacts is 4 A! Consider that the actuators are supplied from the U supply line.
  • Page 46: Figure 17: Connectors (Exemplary)

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 23.24 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Aktoren 767- 48xx, 71xx allgemei n @ 5\mod_1249297826390_21.doc x @ 39983 @ @ 1 To connect the actuators to the digital outputs, proceed as follows: Disconnect the power supply from those devices on which you have mounted the module.
  • Page 47: Commissioning

    Pos : 25 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/In Betri eb nehmen - Ü bersc hrift 1 @ 4\mod_1240901452750_21.doc x @ 31570 @ 1 @ 1 Commissioning Pos : 26 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Achtung/Achtung: Offene Ansc hlüss e @ 8\mod_1278308159953_21.doc x @ 58910 @ @ 1 Exposed connections! If connections have not been closed with protective caps, liquid or dirt can penetrate the components of the 767 Series module and ruin it.
  • Page 48: Parameterizing

    Pos : 29 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/Parametrier en - Übersc hrift 1 @ 3\mod_1223554593484_21.doc x @ 23717 @ 1 @ 1 Parameterizing Pos : 30.1 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n @ 5\mod_1249376935062_21.doc x @ 40257 @ @ 1 All parameters listed here can be set using WAGOframe (or another FDT/DTM frame application) for the module.
  • Page 49: Figure 18: Example Of An Open Dtm, Including Parameters

    PC. Opens the DTM online help. Pos : 30.2 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n - Bild @ 5\mod_1249377954171_21.doc x @ 40275 @ @ 1 Figure 18: Example of an open DTM, including parameters Pos : 30.3 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 50: Electronic Type Label

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 30.4 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx Elektronisc hes T ypensc hild @ 5\mod_1249377784078_21.doc x @ 40260 @ 2 @ 1 Electronic Type Label Table 23: Information on the module...
  • Page 51: Diagnostic Overview

    Parameterizing 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 30.6 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx Di agnoseübersic ht_1 @ 14\mod_1360836957753_21.doc x @ 111870 @ 2 @ 1 Diagnostic Overview The currently pending diagnostics existing on the module are displayed here. In this view of the DTM, you can enable simulation of the diagnostics, as well as disable transmission of the diagnostics.
  • Page 52: Table 25: Information About Existing Module Diagnostics

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 30.9 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- 4801, - 02, -05, -06, 58xx, 7401 Globale Diagnos en @ 7\mod_1265877071562_21.doc x @ 50302 @ @ 1 Table 25: Information about existing module diagnostics...
  • Page 53: Parameters Of Outputs

    Parameterizing 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 30.15 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/02_Par ameter der Ausg änge - Übersc hrift 2 @ 8\mod_1278492149177_21.doc x @ 59225 @ 2 @ 1 Parameters of Outputs Pos : 30.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Gefahr/Gefahr: Manuell ges etzte Ausg änge @ 8\mod_1278491351536_21.doc x @ 59222 @ @ 1...
  • Page 54 Parameterizing WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Table 27: Overview of adjustable parameters for the digital outputs Parameter Description Manual operation Manual operation enables you to set the outputs irrespective of the process data. The checkbox of the "Process Image Value" parameter is unselected.
  • Page 55: Global Settings

    Parameterizing 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 30.19 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767- xxxx Gl obal e Parameter @ 7\mod_1265881925390_21.doc x @ 50320 @ 2 @ 1 Global Settings Table 28: Overview of parameters for the entire module...
  • Page 56: Automatic Storage Of System Parameters

    "Parameter Setting via FDT/DTM" section. Pos : 30.22 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767- xxxx Aktualisier ung der Firmwar e @ 7\mod_1265881922171_21.doc x @ 50306 @ 2 @ 1 Updating the Firmware When updating the module firmware, the saved module parameters can be overwritten.
  • Page 57: Process Image

    You can enable or suppress the individual module diagnostics. For more information, see the Section "Diagnostics Overview". Pos : 34 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: Prozess abbil d 767-4xxx @ 5\mod_1249373655593_21.doc x @ 40211 @ @ 1 Diagnostics "Actuator short circuit/overload", "Over temperature" and "Actuator Supply Open Load"...
  • Page 58: Output Data

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 36 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-48xx Ausgangsdaten @ 5\mod_1249368071937_21.doc x @ 40147 @ 2 @ 1 Output Data The process image for the output data that is transmitted from the fieldbus coupler to the I/O module has a size of 1 byte.
  • Page 59 WAGO-SPEEDWAY 767 Process Image 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Byte 3 Diagnostic confirmation : Overtemperature on channel 1 conf. : Overtemperature on channel 2 conf. : Overtemperature on channel 3 confirmed : Overtemperature on channel 4 confirmed : Overtemperature on channel 5 confirmed...
  • Page 60: Input Data

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 38 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-48xx Ei ngangsdaten @ 5\mod_1249368072484_21.doc x @ 40151 @ 2 @ 1 Input Data The image for the process data, which are sent from the I/O module to the fieldbus coupler, has a size of 0 byte.
  • Page 61 WAGO-SPEEDWAY 767 Process Image 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Byte 3 Diagnostic message : Undervoltage U : Undervoltage U Diagnostic messages Normally, both "Actuator short circuit" and "Overtemperature" diagnostic messages are issued simultaneously! Pos : 39 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...
  • Page 62: Diagnostics

    Information regarding remedies of certain causes is also provided. Pos : 42.2 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: 767- 4xxx/- 5xxx Betriebs meldungen Deakti vierbar e Diag nos en @ 7\mod_1265892089421_21.doc x @ 50332 @ @ 1 Disabling specific diagnostics Use the diagnostic overview (section "Parameterizing"...
  • Page 63 S-BUS cable for damages. Pos : 42.5 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx DO/AO Allgemei n (Pos. 15, Teil 2) @ 7\mod_1268637553513_21.doc x @ 52463 @ @ 1 Green, flashing, The module is in HOLD Is initiated by the fieldbus mode.
  • Page 64: Table 32: Operating Messages 2

    Pos : 42.8 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx U LS und UA (Pos. 18 + 19) @ 8\mod_1278577022948_21.doc x @ 59316 @ @ 1 Green Actuator supply U present.
  • Page 65: Service

    Disconnect the power supply from those devices on which you have mounted the module. Pos : 48 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Vorsic ht/Vorsicht: H eiße Ansc hlussbuc hs en @ 8\mod_1278308217203_21.doc x @ 58913 @ @ 1 Hot connection sockets! Even when taking into account derating, high surface temperatures on the metallic connection sockets and on the enclosure can arise during operation.
  • Page 66: Removing The Module From Your System

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 51 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/I/O-M odule/Ser vic e 767- xxxx allgemein 2.2 @ 8\mod_1278649957222_21.doc x @ 59430 @ 3 @ 1 10.2.2 Removing the Module from Your System...
  • Page 67: Removing The Module From The Profile Adapter

    Service 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 55 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/I/O-M odule/Ser vic e 767- xxxx allgemein 4 @ 5\mod_1249471383765_21.doc x @ 40467 @ 332 @ 1 10.2.4 Removing the Module from the Profile Adapter...
  • Page 68: Use Of The Interference-Free Module In Safety Applications

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 57.1 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_Ei nsatz des rüc kwirkungsfrei en Moduls in Sic herheits anwendung en_1 @ 11\mod_1317280241272_21.doc x @ 79997 @ 1 @ 1...
  • Page 69: General Measures And Conditions For The Power Supply Solution Of The Module

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 57.4 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_Allgemeine M aßnahmen und Auflag en für das Versorgungs konz ept des Moduls_3 @ 11\mod_1317280455233_21.doc x @ 80003 @ 2 @ 1 11.2...
  • Page 70 U and U can each be protected using a safety fuse according to EN 60127-2 or electronic fuse, e.g. WAGO 787-861. Safety fuses according to EN 60127-2 must meet the following technical requirements: •...
  • Page 71: Measures And Conditions For Shielded Power Supply Of The Module

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 57.6 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_M aß nahmen und Aufl agen für die gesc hirmte Spannungs versorgung des Moduls _4 @ 11\mod_1317280498953_21.doc x @ 80015 @ 2 @ 1 11.3...
  • Page 72: Measures And Conditions For Unshielded Power Supply Of The Module

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 57.8 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_M aß nahmen und Aufl agen für die ungesc hir mte Spannungs versorgung des Moduls_5 @ 11\mod_1317280618487_21.doc x @ 80006 @ 2 @ 1 11.4...
  • Page 73: Connection Of The Module To Safety Switching Devices

    767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 57.10 /Serie 767 ( WAGO-SPEED WAY)/Ei ns atz i n sic herheitsgeric hteten Anwendungen/767- xxxx_Anschl uss des M oduls an Sicherheitss chaltger äte_6 @ 11\mod_1317280654504_21.doc x @ 80009 @ 23 @ 1 11.5...
  • Page 74: Examples Of Connection

    WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 59 /Serie 767 ( WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_Ansc hlus sbeispi el_M 8_7 @ 11\mod_1317280693802_21.doc x @ 80012 @ 3 @ 1 11.5.2 Examples of Connection...
  • Page 75: Appendix

    Pos : 61 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Anhang - Z ubehör Anhang - Ü bers chrift 1 @ 4\mod_1239874070437_21.doc x @ 30560 @ 1 @ 1 Appendix Pos : 62 /Serie 767 ( WAGO-SPEED WAY)/Anhang/I/O-M odule/Anhang 767-48xx Di agnos einfor mation @ 5\mod_1249471902718_21.doc x @ 40474 @ 2 @ 1 12.1...
  • Page 76: List Of Figures

    List of Figures WAGO-SPEEDWAY 767 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 64 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: Connectors .....................
  • Page 77: List Of Tables

    WAGO-SPEEDWAY 767 List of Tables 767-4801/000-800 8DO 24V DC 0.5A IF (8xM8) Pos : 66 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 78 Pos : 68 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

767-4801/000-800

Table of Contents