Serial Interface (767-5203); Table 46: Parameters Of The Serial Interface - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
9.2.6

Serial Interface (767-5203)

The following settings can be applied to the Serial Interface (preset values in
italics):
Parameter Combinations
Not all parameter combinations are valid.
More information about valid parameterizations is available in the respective I/O
module manual.

Table 46: Parameters of the Serial Interface

Parameter
Module
Diagnostics: Short circuit field supply
channel 0, 1, 2, 3
Operating mode
Diagnostics
Filter time [ms]
Substitute strategy
Substitute value
Interface 1, 2
Operating mode
Transmission rate [Baud]
Stop bits
Stop bits
Parity
Flow control
Manual
Version 2.2.0
Description
disabled
enabled
Digital input
Digital output
disabled
enabled
deactivated
0.1
0.5
3.0
15.0
20.0
Provide or apply substitute value
Provide or hold last value
0
1
RS-232
RS-422/-485hHalf duplex
RS-422/485 full duplex
2400
4800
9600
19200
38400
57600
115200
7
8
1
2
None
Odd
Even
None
Xon/Xoff
RTS/CTS
Parameterizing 101