Figure 74: Apply Device Value - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
IP address
The PROFINET fieldbus coupler can only be accessed via an IP address if it has
received a valid device name (e.g., by assignment using a configuration tool or by
setting the DIP switches to a static device name) and an IP address (using a
configuration tool).
6 Assign the IP address of the physical fieldbus coupler to the fieldbus
coupler DTM from the "Network View" by selecting the correct IP address
from the list that appears below the "Device found" pane. Click [Apply] to
complete the link.
If you want to apply the IP address to the settings of the linked DTM,
activate the "Apply Device Value" checkbox and click [Apply].

Figure 74: Apply Device Value

7 Parameterize the 767 components and save the parameterization as a project
file. Transfer the project file later to the respective 767 components.
Manual
Version 2.2.0
Parameterization via WAGOframe 183