Figure 19: Wago-I/O-Check User Interface (Example) - WAGO 750-486/040-000 Manual

58 Commissioning
To open specific parameterization dialogs for the I/O module 750-486/040-000,
proceed as follows:
1. Right-click on the I/O module.
2. Click the Settings menu item (see following figure).

Figure 19: WAGO-I/O-CHECK User Interface (Example)

The parameterization dialog appears, which forms the basis for the following
description. This forms the basis for the subsequent explanation.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750 XTR
750-486/040-000 4AI 0/4-20mA NE43 Ex i XTR