Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
767-4804/000-800
8DO 24V DC 2.0A IF (4xM12)
Digital Output Module 24 V DC / 2.0 A
Version 1.1.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1
Telecontrol module compact, 2 ai, web for wago-to-pass 761. telecontrol module for fault detection/indication, monitoring and remote control. (116 pages)
Ttl incremental/ssi encoder 2 encoder interfaces (2 x m12) + 4 digital inputs/outputs (2 x m12, 2 inputs/outputs per connector) for wago-speedway 767 (102 pages)
Information on Mounting ................ 29 Tools and Accessories Required for Mounting ........31 Direct Mounting on Your System ............32 Mounting on a Carrier Rail (only with WAGO Accessories) ....33 4.4.1 Fastening the Carrier Rail Adapter to the Module ......33 4.4.2...
Page 4
Table of Contents WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) 4.5.2 Fastening the Module with Profile Adapter to a Profile Rail ..... 36 Marking and Replacing the Marking Spaces .......... 37 Mounting the Spacer in the Case of Compact Arrangement ....38 Connecting Data and Supply Cables ............
Page 5
WAGO-SPEEDWAY 767 Table of Contents 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) List of Tables ......................78 === Ende der Liste für T extmar ke Verzeic hnis_vor ne === Manual Version 1.1.0...
WAGO-SPEEDWAY 767 Notes about this Documentation 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 13.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 13.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
Page 8
Notes about this Documentation WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 13.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...
Font Conventions Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save > A greater-than sign between two names means the selection of a menu item from a menu.
Thus, the existence of such rights cannot be excluded. Pos : 16.4 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Pers onalqualifi kation 767- xxxx @ 5\mod_1248175871265_21.doc x @ 38705 @ 3 @ 1 2.1.2...
Pos : 16.8 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Bes timmungsgemäß e Verwendung 767-D Os 1_1 Hi nweis _R üc kwir kungsfr ei @ 11\mod_1317278760144_21.doc x @ 79992 @ @ 1 The digital outputs of the module are interference-free to eliminate any impact by the internal potential groups.
Series component has been in operation, allow it to cool off before moving it. Pos : 16.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1...
Observe the marking on the front and rear side of the module. Pos : 16.21 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sic her hei tsei nrichtungen 767- xxxx @ 7\mod_1268142379773_21.doc x @ 52055 @ 2 @ 1 Safety Equipment All 767 Series products are designed to meet the requirements of IP67.
Pos : 18.1 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Gerätebesc hreibung/Gerätebeschr eibung - Übersc hrift 1 @ 3\mod_1233756084656_21.doc x @ 27096 @ 1 @ 1 Device Description Pos : 18.2 /Serie 767 (WAGO-SPEED WAY)/Ger ätebesc hrei bung/I/O-Module/Gerätebes chr eibung 767- 48xx Standar d @ 5\mod_1248412361437_21.doc x @ 38974 @ @ 1 The digital output module 767-4804/000-800 is used to control solenoid valves, gates, transmitters, relays or other electrical loads.
Yellow/red Information on outputs Pos : 18.17 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Anz eigeel emente/I/O-M odul e/Legende zu Anz eigeel emente 767- xxxx, Pos. 18+19: Status U A und ULS @ 7\mod_1268053208570_21.doc x @ 51957 @ @ 1 Green Actuator supply is present.
Schematic Diagram Pos : 18.23 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Sc hematis che Sc haltbilder/I/O-M odule/Ei nleitung zum sc hematisc hen Sc haltbil d 767-4xxx D O @ 10\mod_1306758024488_21.doc x @ 73329 @ @ 1 The following schematic diagram provides an overview of the power supply and principle of operation of the power supply connections, as well as the digital outputs of the modules (see also chapters "Connecting the Supply Cable"...
If the device is used in an application in the hazardous area, the technical data contained in the ATEX/IECEx certificate are binding in this application! Pos : 18.31 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Tec hnisc he Daten/I/O-M odule/Digitalausgangs module/Tec hnisc he D aten 767-4804 @ 5\mod_1248946012453_21.doc x @ 39540 @ 33333333333 @ 1 3.7.1 General Information Table 8: Technical Data –...
Device Description WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) 3.7.4 Outputs Table 11: Technical data – Outputs No. of outputs Connection type M12 connectors, A coded, 4 poles Wire connection 2- to 3-wire Output voltage ≤ U Output current (per channel) 2.0 A (max.
WAGO-SPEEDWAY 767 Device Description 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) 3.7.5 Information on Selecting the Actuator Table 12: Technical data – Information on Selecting the Actuator Delay time HW from 0 to 1 (0 – 90 %) Typically 75 µs (resistive load) from 1 to 0 (0 –...
Pos : 18.33.3.3 /D okumentati on allgemein/Gli ederungsel emente/------Leerzeil e------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1 Pos : 18.33.4 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Zul ass ung en/Zul ass ung en I/O-Modul e 767- xxxx Ex, ohne Variantenangabe - Ei nlei tung @ 24\mod_1447686155055_21.doc x @ 195692 @ @ 1 The following Ex approvals are pending for 767-4804/000-800 module: Pos : 18.33.5 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Ex-Z ul ass ungen/TÜ...
Standards and Guidelines Pos : 18.35.2 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Nor men und Richtlini en/N or men und Richtlinien I/O-Modul e 767- xxxx, ohne Variantenangabe - Ei nleitung @ 24\mod_1447686649865_21.doc x @ 195700 @ @ 1 The module 767-4804/000-800 meets the following standards and guidelines: Pos : 18.35.3 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/EM V-Nor men - Standard/EG-EM V-Richtli nie 2004/108/EG @ 7\mod_1274262373820_21.doc x @ 56628 @ @ 1...
Pos : 21.2 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Hi nweis e 767- xxxx allgemei n_1 @ 5\mod_1249028727125_21.doc x @ 39643 @ 2 @ 1 Information on Mounting The following information shall always be observed: •...
Page 30
WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 21.5 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/Hi nweis : Montage_Ei nbaulag e_767- xxxx_I/O-M odule @ 24\mod_1448268126523_21.doc x @ 196008 @ @ 1 Any mounting position is possible. Ensure a safe mounting position! In explosion hazardous environments no increased mechanical loads must be present at the installation location.
Mounting 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 21.7 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Wer kzeug 767- xxxx allgemein_1 @ 5\mod_1249034240265_21.doc x @ 39783 @ 2 @ 1 Tools and Accessories Required for Mounting Depending on the mounting type, the following tools are required for installation: •...
M4 screws via the mounting holes. Pos : 21.30 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 1_767- xxxx_4xM 12 - Bil d @ 5\mod_1249284921328_21.doc x @ 39843 @ @ 1 Figure 13: Attaching a spacer to a module Pos : 21.31 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
The last 767 component is fastened without a spacer. Pos : 21.33 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 2_767- xxxx_4xM 12 - Bil d @ 5\mod_1249284983031_21.doc x @ 39847 @ @ 1 Figure 14: Attaching another module with a spacer Pos : 22 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 23.1 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/01_Ansc hl uss der Daten- und Vers orgungs kabel - Übersc hrift 1 @ 8\mod_1278310189976_21.doc x @ 58919 @ 1 @ 1 Connecting Data and Supply Cables Pos : 23.2 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/02_Hinweis e - Ü...
Pos : 23.9 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/Ans chl uss _Hinweise T eil 3.1 @ 8\mod_1278314911479_21.doc x @ 58959 @ @ 1 •...
WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 23.12 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_S-BU S allgemein @ 5\mod_1249287447062_21.doc x @ 39873 @ 2 @ 1 Connecting the S-BUS Cables The S-BUS is used for communication between a fieldbus coupler and the connected 767 Series components.
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 23.15 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Spannungs vers orgung 767- 4803, - 4804 @ 5\mod_1249306158703_21.doc x @ 40087 @ 2 @ 1 Connecting the Supply Cable The supply cable provides power to the module.
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 23.18 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Spannungs vers orgung 767- 4803, - 4804_2 @ 8\mod_1278321058229_21.doc x @ 58971 @ @ 1 To connect the supply cable to the fieldbus coupler and I/O modules, proceed as...
X2, X4 Pos : 23.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers.kontakte(Aktor en) @ 8\mod_1278305558285_21.doc x @ 58898 @ @ 1 The highest current carrying capacity of the supply contacts is 4 A! Consider that the actuators are supplied from the U supply line.
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 23.24 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Aktoren 767- 48xx, 71xx allgemei n @ 5\mod_1249297826390_21.doc x @ 39983 @ @ 1 To connect the actuators to the digital outputs, proceed as follows: Disconnect the power supply from those devices on which you have mounted the module.
Pos : 25 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/In Betri eb nehmen - Ü bersc hrift 1 @ 4\mod_1240901452750_21.doc x @ 31570 @ 1 @ 1 Commissioning Pos : 26 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Achtung/Achtung: Offene Ansc hlüss e @ 8\mod_1278308159953_21.doc x @ 58910 @ @ 1 Exposed connections! If connections have not been closed with protective caps, liquid or dirt can penetrate the components of the 767 Series module and ruin it.
Pos : 29 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/Parametrier en - Übersc hrift 1 @ 3\mod_1223554593484_21.doc x @ 23717 @ 1 @ 1 Parameterizing Pos : 30.1 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n @ 5\mod_1249376935062_21.doc x @ 40257 @ @ 1 All parameters listed here can be set using WAGOframe (or another FDT/DTM frame application) for the module.
WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 30.6 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx Di agnoseübersic ht_1 @ 14\mod_1360836957753_21.doc x @ 111870 @ 2 @ 1 Diagnostic Overview The currently pending diagnostics existing on the module are displayed here. In this view of the DTM, you can enable simulation of the diagnostics, as well as disable transmission of the diagnostics.
Page 55
WAGO-SPEEDWAY 767 Parameterizing 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Table 26: Overview of adjustable parameters for the digital outputs Parameter Description Manual operation Manual operation enables you to set the outputs irrespective of the process data. The checkbox of the "Process Image Value" parameter is unselected.
"Parameter Setting via FDT/DTM" section. Pos : 30.22 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767- xxxx Aktualisier ung der Firmwar e @ 7\mod_1265881922171_21.doc x @ 50306 @ 2 @ 1 Updating the Firmware When updating the module firmware, the saved module parameters can be overwritten.
You can enable or suppress the individual module diagnostics. For more information, see the Section "Diagnostics Overview". Pos : 34 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: Prozess abbil d 767-4xxx @ 5\mod_1249373655593_21.doc x @ 40211 @ @ 1 Diagnostics "Actuator short circuit/overload", "Over temperature" and "Actuator Supply Open Load"...
Process Image 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 36 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-48xx Ausgangsdaten @ 5\mod_1249368071937_21.doc x @ 40147 @ 2 @ 1 Output Data The process image for the output data that is transmitted from the fieldbus coupler to the I/O module has a size of 1 byte.
Page 60
Process Image WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Byte 3 Diagnostic confirmation : Overtemperature on channel 1 conf. : Overtemperature on channel 2 conf. : Overtemperature on channel 3 confirmed : Overtemperature on channel 4 confirmed : Overtemperature on channel 5 confirmed...
Process Image 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 38 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-48xx Ei ngangsdaten @ 5\mod_1249368072484_21.doc x @ 40151 @ 2 @ 1 Input Data The image for the process data, which are sent from the I/O module to the fieldbus coupler, has a size of 0 byte.
Page 62
Process Image WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Byte 3 Diagnostic message : Undervoltage U : Undervoltage U Diagnostic messages Normally, both "Actuator short circuit" and "Overtemperature" diagnostic messages are issued simultaneously! Pos : 39 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...
Information regarding remedies of certain causes is also provided. Pos : 42.2 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: 767- 4xxx/- 5xxx Betriebs meldungen Deakti vierbar e Diag nos en @ 7\mod_1265892089421_21.doc x @ 50332 @ @ 1 Disabling specific diagnostics Use the diagnostic overview (section "Parameterizing"...
Page 64
S-BUS cable for damages. Pos : 42.5 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx DO/AO Allgemei n (Pos. 15, Teil 2) @ 7\mod_1268637553513_21.doc x @ 52463 @ @ 1 Green, flashing, The module is in HOLD Is initiated by the fieldbus mode.
Pos : 42.8 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx U LS und UA (Pos. 18 + 19) @ 8\mod_1278577022948_21.doc x @ 59316 @ @ 1 Green Actuator supply U present.
Disconnect the power supply from those devices on which you have mounted the module. Pos : 48 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Vorsic ht/Vorsicht: H eiße Ansc hlussbuc hs en @ 8\mod_1278308217203_21.doc x @ 58913 @ @ 1 Hot connection sockets! Even when taking into account derating, high surface temperatures on the metallic connection sockets and on the enclosure can arise during operation.
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 57.4 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_Allgemeine M aßnahmen und Auflag en für das Versorgungs konz ept des Moduls_3 @ 11\mod_1317280455233_21.doc x @ 80003 @ 2 @ 1 11.2...
Page 71
U and U can each be protected using a safety fuse according to EN 60127-2 or electronic fuse, e.g. WAGO 787-861. Safety fuses according to EN 60127-2 must meet the following technical requirements: •...
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 57.8 /Serie 767 (WAGO-SPEED WAY)/Eins atz in sicherheitsg erichteten Anwendung en/767- xxxx_M aß nahmen und Aufl agen für die ungesc hir mte Spannungs versorgung des Moduls_5 @ 11\mod_1317280618487_21.doc x @ 80006 @ 2 @ 1 11.4...
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 57.10 /Serie 767 ( WAGO-SPEED WAY)/Ei ns atz i n sic herheitsgeric hteten Anwendungen/767- xxxx_Anschl uss des M oduls an Sicherheitss chaltger äte_6 @ 11\mod_1317280654504_21.doc x @ 80009 @ 23 @ 1 11.5...
WAGO-SPEEDWAY 767 List of Figures 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 64 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: Connectors (exemplary) .................
Page 78
List of Tables WAGO-SPEEDWAY 767 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) Pos : 66 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
Page 79
WAGO-SPEEDWAY 767 List of Tables 767-4804/000-800 8DO 24V DC 2.0A IF (4xM12) === Ende der Liste für T extmar ke Verzeic hnis_hi nten === Manual Version 1.1.0...
Page 80
Pos : 68 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...