WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
7.3.9
"Administration" View
On this page, you can reset the software or reset all parameters to the default
status. You can only use these functions if you are logged on as the "admin" user.
An overview of passwords can be found in section "User Management".
To activate modified parameters in the fieldbus coupler, click on [Software
1.
Reset].
2.
To reset all parameters of the WBM to the default status, click on [Restore
Factory Settings]. This also resets the IP address, causing the connection to
the fieldbus coupler to be lost. In your configuration environment, assign a
new IP address and station name to communicate with the device again.
Pos : 35 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
Commissioning
75