Table of Contents
Advertisement
VCU110 Evaluation Board Features
Overview
The VCU110 evaluation board for the Xilinx Virtex
XCVU190-2FLGC2104EES9847 FPGA provides a hardware environment for developing and
evaluating designs targeting the UltraScale XCVU190-2FLGC2104EES9847 FPGA. The
VCU110 evaluation board provides features common to many evaluation systems, including
QDRII+ and RLD3 component memory, a hybrid memory cube component memory, a CFP4
Quad C form-factor pluggable module connector, an Ethernet PHY, general purpose I/O, a
four-lane PCI Express® interface connector, and two UART interfaces. Other features can be
supported using VITA-57 FPGA mezzanine cards (FMC) attached to two high pin count
(HPC) FMC connectors.
See
Appendix H, Additional Resources and Legal Notices
and resources relevant to the VCU110 board.
VCU110 Evaluation Board Features
The VCU110 evaluation board features are listed here. Detailed information for each feature
is provided in
Feature
•
Virtex UltraScale XCVU190-2FLGC2104EES9847 FPGA
•
144 Mb QDRII+ component memory interface (1 x 18-bit SIO device)
•
2 x 576 Mb RLD3 component memories (1 x 36-bit x 16M), 1 x 18-bit x 32M CIO
devices)
•
4 GB Hybrid Memory Cube (HMC)
•
Dual 512 Mb Quad-SPI (QSPI) flash memory
•
Micro secure digital (SD) connector
•
USB JTAG interface through Digilent module with micro-B USB connector
•
Clock sources:
SI5335A Quad clock generator
°
Si570 IIC programmable LVDS clock generator
°
VCU110 Evaluation Board
UG1073 (v1.2) March 26, 2016
Descriptions, starting on
www.xilinx.com
®
UltraScale™
for references to documents, files,
page
12.
Send Feedback
Chapter 1
6
Advertisement
Table of Contents
