Chapter 1: Vc707 Evaluation Board Features; Overview; Additional Information; Vc707 Board Features - Xilinx VC707 User Manual

VC707 Evaluation Board Features

Overview

The VC707 evaluation board for the Virtex®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Virtex-7 XC7VX485T-2FFG1761C FPGA.
The VC707 board provides features common to many embedded processing systems,
including a DDR3 SODIMM memory, an 8-lane PCI Express® interface, a tri-mode
Ethernet PHY, general purpose I/O, and two UART interfaces. Other features can be
added by using mezzanine cards attached to either of two VITA-57 FPGA mezzanine
connectors (FMC) provided on the board. Two high pin count (HPC) FMCs are provided.
See
described in

Additional Information

See
relevant to the VC707 board.

VC707 Board Features

•
•
•
•
•
•
•
•
VC707 Evaluation Board
UG885 (v1.4) May 12, 2014
VC707 Board Features for a complete list of features. The details for each feature are
Feature Descriptions, page
Appendix F, Additional Resources
Virtex-7 XC7VX485T-2FFG1761C FPGA
1 GB DDR3 memory SODIMM
128 MB Linear byte peripheral interface (BPI) Flash memory
USB 2.0 ULPI Transceiver
Secure Digital (SD) connector
USB JTAG through Digilent module
Clock Generation
• Fixed 200 MHz LVDS oscillator (differential)
2
• I C programmable LVDS oscillator (differential)
• SMA connectors (differential)
• SMA connectors for GTX transceiver clocking
GTX transceivers
• FMC1 HPC connector (eight GTX transceivers)
• FMC2 HPC connector (eight GTX transceiver)
• SMA connectors (one pair each for TX, RX, and REFCLK)
• PCI Express (eight lanes)
• Small form-factor pluggable plus (SFP+) connector
www.xilinx.com
10.
for references to documents, files and resources
Chapter 1
7
Send Feedback