Chapter 1: Zc702 Evaluation Board Features; Overview; Zc702 Board Features - Xilinx ZC702 User Manual

ZC702 Evaluation Board Features

Overview

The ZC702 evaluation board for the XC7Z020 All Programmable SoC (AP SoC) provides a
hardware environment for developing and evaluating designs targeting the Zynq™-7000
XC7Z020-1CLG484C AP SoC. The ZC702 board provides features common to many
embedded processing systems, including DDR3 component memory, a tri-mode Ethernet
PHY, general purpose I/O, and two UART interfaces. Other features can be supported using
VITA-57 FPGA mezzanine cards (FMC) attached to either of two low pin count (LPC) FMC
connectors.

ZC702 Board Features

The ZC702 board features are listed in here. Detailed information for each feature is
provided in Feature Descriptions
• Zynq-7000 XC7Z020-1CLG484C AP SoC
• 1 GB DDR3 component memory (four 256 Mb x 8 devices)
• 128 Mb Quad SPI flash memory
• USB 2.0 ULPI (UTMI+ low pin interface) transceiver
• Secure Digital (SD) connector
• USB JTAG interface via Digilent module
• Clock sources:
Fixed 200 MHz LVDS oscillator (differential)
°
2
I C programmable LVDS oscillator (differential)
°
Fixed 33.33 MHz LVCMOS oscillator (single-ended)
°
• Ethernet PHY RGMII interface with RJ-45 connector
• USB-to-UART bridge
• HDMI codec
2
• I C bus
ZC702 Board User Guide
UG850 (v1.2) April 4, 2013
starting on page 12.
www.xilinx.com
Chapter 1
7