Table of Contents
Advertisement
AC701 Evaluation Board Features
Overview
The AC701 evaluation board for the Artix™-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Artix-7 XC7A200T-2FBG676C FPGA. The
AC701 board provides features common to many embedded processing systems,
including a DDR3 SODIMM memory, an 4-lane PCI Express® interface, a tri-mode
Ethernet PHY, general purpose I/O, and a UART interface. Other features can be added by
using mezzanine cards attached to the VITA-57 FPGA mezzanine connector (FMC)
provided on the board. A high pin count (HPC) FMC connector is provided. See
Board Features
Feature Descriptions, page
Additional Information
See
relevant to the AC701 board.
AC701 Board Features
•
•
•
•
•
•
•
•
AC701 Evaluation Board
UG952 (v1.0) October 23, 2012
for a complete list of features. The details for each feature are described in
7.
Appendix F, Additional Resources
Artix-7 XC7A200T-2FBG676C FPGA
1 GB DDR3 memory SODIMM
256 Mb Quad-SPI Flash memory
Secure Digital (SD) connector
USB JTAG via Digilent module
Clock Generation
•
Fixed 200 MHz LVDS oscillator
2
•
I
C programmable LVDS oscillator
•
SMA connectors
•
SMA connectors for GTP transceiver clocking
GTP transceivers
•
FMC HPC connector (two GTP transceivers)
•
SMA connectors (one pair each for TX, RX and REFCLK)
•
PCI Express (four lanes)
•
Small form-factor pluggable plus (SFP+) connector
•
Ethernet PHY RGMII interface (RJ-45 connector)
PCI Express endpoint connectivity
www.xilinx.com
for references to documents, files and resources
Chapter 1
AC701
5
Advertisement
Table of Contents
