Table of Contents
Advertisement
AC701 Evaluation Board Features
Overview
The AC701 evaluation board for the Artix®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Artix-7 XC7A200T-2FBG676C FPGA. The AC701
board provides features common to many embedded processing systems, including a DDR3
SODIMM memory, an 4-lane PCI Express® interface, a tri-mode Ethernet PHY, general purpose I/
O, and a UART interface. Other features can be added by using an FPGA mezzanine card (FMC)
attached to the VITA-57 FPGA mezzanine connector provided on the board. A high pin count
(HPC) FMC connector is provided. See
details for each feature are described in
Additional Information
See
the AC701 board.
AC701 Board Features
•
•
•
•
•
•
•
•
AC701 Evaluation Board
UG952 (v1.4) August 6, 2019
Appendix G, Additional Resources
Artix-7 XC7A200T-2FBG676C FPGA
1 GB DDR3 memory SODIMM
256 Mb quad serial peripheral interface (quad SPI) flash memory
Secure Digital (SD) connector
USB JTAG through Digilent module
Clock generation
•
Fixed 200 MHz LVDS oscillator
•
I2C programmable LVDS oscillator
•
SMA connectors
•
SMA connectors for GTP transceiver clocking
GTP transceivers
•
FMC HPC connector (two GTP transceivers)
•
SMA connectors (one pair each for TX, RX and REFCLK)
•
PCI Express (four lanes)
•
Small form-factor pluggable plus (SFP+) connector
•
Ethernet PHY RGMII interface (RJ-45 connector)
PCI Express endpoint connectivity
•
Gen1 4-lane (x4)
www.xilinx.com
AC701 Board Features
for a complete list of features. The
Feature
Descriptions.
for references to documents, files and resources relevant to
Chapter 1
7
Send Feedback
Advertisement
Table of Contents
