VC707 Evaluation Board Features
Overview
The VC707 evaluation board for the Virtex®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Virtex-7 XC7VX485T-2FFG1761C FPGA. The
VC707 board provides features common to many embedded processing systems, including a DDR3
SODIMM memory, an 8-lane PCI Express® interface, a tri-mode Ethernet PHY, general purpose
I/O, and two UART interfaces. Other features can be added by using mezzanine cards attached to
either of two VITA-57 FPGA mezzanine connectors (FMC) provided on the board. Two high pin
count (HPC) FMCs are provided. See
details for each feature are described in
Additional Information
See
the VC707 board.
VC707 Board Features
•
•
•
•
•
•
•
•
VC707 Evaluation Board
UG885 (v1.8) February 20, 2019
Appendix G, Additional Resources
Virtex-7 XC7VX485T-2FFG1761C FPGA
1 GB DDR3 memory SODIMM
128 MB Linear byte peripheral interface (BPI) Flash memory
USB 2.0 ULPI Transceiver
Secure Digital (SD) connector
USB JTAG through Digilent module
Clock Generation
•
Fixed 200 MHz LVDS oscillator (differential)
2
•
I
C programmable LVDS oscillator (differential)
•
SMA connectors (differential)
•
SMA connectors for GTX transceiver clocking
GTX transceivers
•
FMC1 HPC connector (eight GTX transceivers)
•
FMC2 HPC connector (eight GTX transceiver)
•
SMA connectors (one pair each for TX, RX, and REFCLK)
•
PCI Express (eight lanes)
•
Small form-factor pluggable plus (SFP+) connector
•
Ethernet PHY SGMII interface (RJ-45 connector)
www.xilinx.com
VC707 Board Features
for a complete list of features. The
Feature
Descriptions.
for references to documents, files and resources relevant to
Chapter 1
7
Send Feedback