Getting Started with System Controller
Overview
The Xilinx system controller is an ease-of-use application that runs at power-up on all
UltraScale FPGA evaluation boards. These select board features can be controlled and
monitored:
•
Programmable clocks
•
Power system monitoring (PMBus)
•
UltraScale FPGA system monitor (SYSMON)
•
Adjustable FMC expansion interface voltage
•
GPIO pushbuttons and configuration DIP switch
•
UltraScale FPGA Configuration
On power-up, the system controller presents a menu-driven selection of actions invoked by
running a terminal program over a UART (115200-8-N-1) connection through the
USB-to-UART bridge interface (J4) (see
X-Ref Target - Figure C-1
Figure C-1: PC Host (Terminal Window) and UltraScale Evaluation Board
VCU110 Evaluation Board
UG1073 (v1.2) March 26, 2016
Figure
C-1).
www.xilinx.com
Appendix C
132
Send Feedback