Dot3Statsexcessivetransmissions (Offset: 0X82C); Dot3Statslatecollisions (Offset: 0X830); Ihcoutucastpkts (Offset: 0X86C); Ihcoutmulticastpkts (Offset: 0X870) - Broadcom NetXtreme/NetLink BCM5718 Series Programmer's Manual

Table of Contents

Advertisement

BCM5718 Programmer's Guide
Statistics Registers

dot3StatsExcessiveTransmissions (offset: 0x82C)

A count of frames for which transmission on a particular interface fails due to excessive collisions.

dot3StatsLateCollisions (offset: 0x830)

The number of times that a collision is detected on a particular interface later than 512 bit-times into the
transmission of a packet.

iHCOutUcastPkts (offset: 0x86C)

The number of packets that higher-level protocols requested be transmitted, and that were not addressed to a
multicast or broadcast address at this sublayer, including those that were discarded or not sent.

iHCOutMulticastPkts (offset: 0x870)

The number of packets that higher-level protocols requested be transmitted, and that were addressed to a
multicast address at this sublayer, including those that were discarded or not sent.

iHCOutBroadcastPkts (offset: 0x874)

The number of packets that higher-level protocols requested be transmitted, and that were addressed to a
broadcast address at this sublayer, including those that were discarded or not sent.

ifCRSERRORS (offset: 0x878)

The number of packets that have CRS errors.

iOUTDISCARDS (offset: 0x87C)

The number of packets that are discarded.

H2B Statistics Registers

There are two sets of H2B Statistics registers – though both sets are accessible from Host as well as APE, each
side shall own a set. Set1 is owned by Host Driver and Set2 is owned by APE. HTX2B Stats Registers resides
in TX-MAC and the B2HRX Stats Registers reside in RDI. A counter is automatically reset to 0 by HW upon a
Read Operation by software. All counters roll over.
Broadcom
®
January 29, 2016 • 5718-PG108-R
Page 340

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetXtreme/NetLink BCM5718 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Netxtreme/netlink bcm5717Netxtreme/netlink bcm5718Netxtreme/netlink bcm5719Netxtreme/netlink bcm5720

Table of Contents