Dhcp Relay - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Option
Hex
Bitmask
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.

DHCP Relay

DHCP Relay Global Settings
This window is used to display and configure the global DHCP relay settings.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Global Settings, as shown
below:
The fields that can be configured are described below:
Parameter
DHCP Smart Relay State
Click the Apply button to accept the changes made.
Figure 4-23 DHCP Class Settings (Edit) Window
Description
Enter the DHCP option number. The range is from 1 to 254.
Enter the hex pattern of the specified DHCP option. Tick the * check box not to
match the remaining bits of the option.
Enter the hex bit mask for masking of the pattern. The masked pattern bits will be
matched. If not specified, all bits entered in the Hex field will be checked.
Figure 4-24 DHCP Relay Global Settings Window
Description
Select to globally enable or disable the DHCP smart relay state here.
50