Dhcp Relay - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server
Interface Settings, as shown below:
The fields that can be configured in DHCPv6 Server Interface Settings are described below:
Parameter
Interface VLAN
Pool Name
Rapid Commit
Preference
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
DHCPv6 Server Operational Information
This window is used to display the DHCPv6 server's operational information.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server
Operational Information, as shown below:

DHCP Relay

DHCP Relay Pool Settings
This window is used to view and configure the DHCP relay pool on a DHCP relay agent.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Pool Settings,
as shown below:
Figure 4-41 DHCPv6 Server Interface Settings Window
Description
Enter the interface's VLAN ID here. The range is from 1 to 4094.
Enter the DHCPv6 server's pool name here. This name can be up to
32 characters long.
Select to allow the proceeding of two-message exchanges or not by
enabling or disabling this option. By default, two-message exchange is
not allowed.
Enter the preference value here. Select the Allow Hint option to allow
hints.
Enter the interface's name here.
Figure 4-42 DHCPv6 Server Operational Information Window
61