Using Keysight IO VISA Connection Expert
Keysight N5991 Test Automation Software Platform Getting Started Guide
The Keysight Connection Expert is recommended to set up new
connections or verify existing connections, for which you must perform the
following steps:
Start the Connection Expert by right-clicking the Keysight IO Libraries
1
Suite icon in the task bar
Select Connection Expert. A window as shown in
2
displayed:
Figure 16
Keysight Connection Expert
3. Click Instruments > Rescan
For each instrument that is required, verify that an entry exists in the list
for the instrument and that before the VISA Address, there is a green
check mark. Once all the instruments to be used are listed properly, you
Using the Software
5
Figure
16, is
33