Rep 4.6 Duplex - Xerox B205 Service Manual

4. Removing the LSU, Figure 2:
a. Release the wire harness from the top of the LSU, then disconnect two connectors
at the LSU.
b. Remove three screws, then remove the LSU.
Screws
Figure 2 LSU Removal
Replacement
The replacement is the reverse of the removal procedure.
Initial Release
Xerox® B205/B215 Multifunction Printer Service Manual

REP 4.6 Duplex

Parts List on PL 4.2
Removal
1. Switch off the printer, then disconnect the power cord.
2. Remove the Paper Tray, PL 6.1 Item
3. Remove the Left and Right Side Covers,
4. Remove the Rear Cover, REP
NOTE: The Rear Cover retains the pivot in the rear left frame notch when the front
latches are released.
5. Press two green buttons to release two tabs locking the Duplex,
Figure 1 Duplex Paper Guide Release Tabs (Bottom View)
6. From the rear of the printer, slide the pivot out of the pivot cutout in the frame, slide the
pivot out of the hole in the opposite frame, then remove the Duplex,
July 2019
4-23
18.
REP 2.2.
2.3.
Figure
Release Tabs
Figure
Repairs / Adjustments
REP 4.5, REP 4.6
1.
2.