Checking For The Correct Position Of The Light Shield - Kodak X-Omat 5000 RA PROCESSOR Installation Instructions Manual

INSTALLATION INSTRUCTIONS

Checking for the Correct Position of the LIGHT SHIELD

H148_0022ACA
H148_0022AA
38
LIGHT
SHIELD
• The SCREWS, WASHERS, and LOCK WASHERS
• The LIGHT SHIELD is not necessary if attaching an
• If not installing the LIGHT SHIELD, advance to
2 SCREWS
[1] Align the holes in the LIGHT SHIELD with the
[2] Install the 2 LOCK WASHERS, WASHERS, and
Note
are provided in the PREPACK CARTON.
accessory, such as a Kodak MULTILOADER or a
Kodak AUTOMATIC FILM FEEDER, to the
PROCESSOR.
Page 39.
holes for the 2 SCREWS.
SCREWS through the LIGHT SHIELD and into
the PROCESSOR.
January 1996 – 5B6339