Table of Contents
Advertisement
M16C/62P Group (M16C/62P, M16C/62PT)
22.3.3.6
FMR06 Bit
This is a read-only bit indicating an auto program operation state. The FMR06 bit is set to "1" when a program
error occurs; otherwise, it is set to "0". Refer to 22.3.8 Full Status Check.
22.3.3.7
FMR07 Bit
This is a read-only bit indicating the auto erase operation status. The FMR07 bit is set to "1" when an erase
error occurs; otherwise, it is set to "0". For details, refer to 22.3.8 Full Status Check.
Figure 22.7 shows Setting and Resetting of EW0 Mode. Figure 22.8 show Setting and Resetting of EW1 Mode.
22.3.3.8
FMR11 Bit
EW0 mode is entered by setting the FMR11 bit to "0" (EW0 mode).
EW1 mode is entered by setting the FMR11 bit to "1" (EW1 mode).
22.3.3.9
FMR16 Bit
This is a read-only bit indicating the execution result of the read lock bit status command.
When the block, where the read lock bit status command is executed, is locked, the FMR16 bit is set to "0".
When the block, where the read lock bit status command is executed, is unlocked, the FMR16 bit is set to "1".
Rev.2.41
Jan 10, 2006
REJ09B0185-0241
http://www.xinpian.net
Page 280 of 390
提供单片机解密、IC解密、芯片解密业务
22. Flash Memory Version
010-62245566 13810019655
Advertisement
Table of Contents
