Table of Contents
Advertisement
Leak Detection
Preceding Work: Perform the "Entering Diagnosis Proce-
dures"
Note
This item is for checking the high fuel pressure after the
IMV supply line of HP pump in DI engine fuel system. If
you still suspect that the fuel pressure system is defective
even after no trouble is detected, perform the fuel pressure
test again by using a fuel pressure tool kit.
1. Select "7] LEAK DETECTION" and press "
"FUNCTION SELECTION" screen.
2. The "LEAK DETECTION" screen that shows the checking
conditions as shown in figure is displayed.
DIAGNOSIS
DI ENG SM - 2004.4
" in
DI10-15
Y220_10037
Y220_10038
Y220_10040
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Advertisement
Chapters
Table of Contents
