SSANGYONG Y200 Manual page 2265

DI10-18
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ECU Replace
Preceding Work: Perform the "Entering Diagnosis Proce-
dures"
1. Select "9] ECU REPLACE" and press "
"FUNCTION SELECTION" screen.
Y220_10048
2. When the "ECU REPLACE (STEP 2)" screen is displayed
followed by "ECU REPLACE (STEP 1) screen, turn the
ignition "OFF" and remove the currently installed ECU.
Notice
Do not turn off the Scan-100 at this time.
Record the below data:
- Vehicle identification number
- Variant coding value
- C2I coding value
- Multi calibration
Y220_10049
3. Install the new ECU.
Y220_10050
" in
DIAGNOSIS
DI ENG SM - 2004.4