Anl-Bd (Analog Line Circuit Pack) - Avaya Definity SI Maintenance Manual

ANL-BD (Analog Line Circuit Pack)

ANL-BD (Analog Line Circuit Pack)
MO Name (in Alarm
Alarm Log) Level
ANL-BD MIN
ANL-BD WRN
ANL-BD MIN
ANL-BD WRN
ANL-BD MIN
ANL-BD WRN
1 Where P is the port network number (1 for PPN and 2 or [G.1] 3 for EPN); C is the carrier designation
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, etc.).
Refer to "XXX-BD (Common Port Circuit Pack)" Maintenance documentation for
circuit pack level errors. See also "ANL-LINE (8-Port Analog Line), ANL-NE-L
(8-Port Neon Analog Line)", and "ANL-16-L (16-Port Neon Analog Line)"
Maintenance documentation for related line information.
555-233-123
Initial Command to Run
test board PCSS sh
test board PCSS sh
test board PCSS sh
test board PCSS sh
test board PCSS sh
test board PCSS sh
1
Full Name of MO
8-Port Analog Line Circuit Pack
8-Port Analog Line Circuit Pack
8-Port Neon Analog Line Circuit Pack
8-Port Neon Analog Line Circuit Pack
16-Port Neon Analog Line Circuit Pack
16-Port Neon Analog Line Circuit Pack
Issue 4 May 2002 10-85